Skip to content
Rules & Rego

Getting Your Modified Car Certified in Queensland: Process and Costs

Queensland sorts mods into minor, basic, complex and specific. Here's which ones need an approved person and a mod plate, and what it typically costs.

7 min readUpdated 3 November 2026Horsepower House
Getting Your Modified Car Certified in Queensland: Process and Costs
In this guide

Queensland does things a little differently. Instead of one blanket rule, TMR sorts modifications into minor, basic, complex and specific, and only some of those need an approved person and a mod plate. Know which bucket your build sits in before you spend money, because one category can't be signed off by an approved person at all.

Quick answer: Minor and basic mods don't need approval if the car still meets the standards. Complex mods (engine upgrades, gearbox and diff changes, body, steering and brake work) must be done to a Queensland-approved code and certified by an approved person, who issues a modification certificate and, where needed, a mod plate. Anything that doesn't fit a code is a specific modification that only TMR can approve. Interstate certs are not automatically recognised.

The four categories

TMR's light vehicle rules (vehicles up to 4.5t GVM) use these categories:

CategoryExamples from TMRApproval needed?
MinorTow bars, roof racks, long-range aerialsNo, if the car still meets all applicable standards
BasicShock absorber substitution, power steering conversion, like-for-like engine replacementNo formal approval, but must meet the Queensland Road Vehicle Modification Handbook and codes
ComplexEngine or suspension upgrades, mass re-rating, gearbox and rear axle changes, body mods, steering or brake replacementsYes. Approved code plus approved person certification
SpecificAnything not minor, basic or complex with no approved codeTMR approval only. An approved person can't certify it

TMR only approves specific modifications if they're reasonably needed by the user or likely to benefit the community, and not unsafe. A pure-fun one-off that falls outside the codes can be a hard sell.

The rulebook

Queensland's rules come from the Queensland Road Vehicle Modification Handbook (September 2024 edition at time of writing), which adopts the national code VSB 14 with some Queensland variations, plus Queensland's own code (QCOP) for things like high lifts up to 150mm and GVM re-rating.

Engine work is one area where Queensland applies its own variations to the national engine section, set out in a separate TMR Vehicle Standards Information sheet. We couldn't fully verify those variations, so ask your approved person exactly which codes and requirements apply to your engine, turbo or ECU work before you start.

The process, step by step

1. Pick an approved person who holds your code

Approved persons are accredited by TMR for specific modification codes. Someone who certifies seat fitment may not be accredited for suspension or brakes. Ask which codes they hold and whether they'll want stage inspections. You can start with engineering workshops in Queensland.

2. Build to the code

The approved person will tell you what the code requires: brake upgrades for more power, mounting and welding standards, test procedures, documentation.

3. Inspection and certification

Once it passes, the approved person issues a modification certificate. The owner gets the original copy, and a copy goes to TMR. Where the code requires it, a modification plate is fitted to the car. Keep the paperwork: TMR's handbook says owners must keep records of modifications and certification, and pass a copy to the next owner when selling.

4. Notify TMR

TMR is clear that it's the owner's job to notify it of changes, because records don't update automatically. Changes to VIN, body shape, colour, seating capacity, number of engine cylinders, fuel type, make and model, or GVM/GCM must be notified within 14 days using form F3524.

5. Tell your insurer

Undeclared mods are an easy reason for an insurer to knock back a claim.

Specific modifications: going to TMR

For a specific modification (or an interstate one), you apply to TMR with:

  1. A completed Vehicle Modification Application (form F1854)
  2. Engineering design documentation for your exact make, model and variant, plus installation photos
  3. Your reasons the modification is needed or beneficial
  4. For interstate mods, proof of registration in the other state

TMR says incomplete applications won't be assessed. The fee for plan review or approval was $110.10 for vehicles up to 4,500kg as at 1 July 2025, and TMR notes fees rose 3.4% on 1 July 2026.

Common street car jobs and where they land

A rough guide to how typical performance mods fall in TMR's categories. Your approved person has the final say.

  • Engine swap to a non-factory engine: complex. Expect brake and driveline questions.
  • Turbo or supercharger on an engine that never had one: complex, and subject to Queensland's variations on the engine code.
  • Like-for-like replacement engine: basic, no approval needed if the car still meets the standards.
  • Big brake kit with non-factory calipers: complex (brake replacement).
  • Coilovers that change suspension design or geometry: complex. Replacement shocks are basic.
  • Rollcage: certified under the LK codes, including one-off cages built by individuals (LK8) and commercial kits (LK10).
  • Tow bar, roof rack, aerial: minor.

If your job doesn't fit any of these and no code covers it, you're likely in specific territory, which means TMR.

Moving a modified car to Queensland

This catches people out. TMR says modifications certified in another state aren't automatically recognised. You'll need TMR approval or certification by a Queensland approved person before registration, on top of the safety certificate needed to transfer to Queensland rego. If you're buying interstate, budget for it. See How to Buy a Car Interstate and Get It Home.

The reverse applies too: the handbook warns Queensland approvals may not be recognised in other states.

Safety certificates vs mod plates

A safety certificate is a basic safety inspection from an approved inspection station, needed when you transfer rego, move a car to Queensland rego, or re-register it. For private sellers it's valid for 2 months or 2,000km. The maximum fee for a car is $102.70 (1 July 2026). It is not engineering and doesn't replace a mod plate. More on this in Roadworthy vs Engineering.

What it costs in Queensland

Approved person fees weren't set out in the TMR material we checked, so expect a quote per job. Typical ballpark figures as of 2026:

JobTypical cost (AUD)
Single-code job (seats, cage, brakes)$400 – $1,000
Suspension or high lift$600 – $1,500
Engine swap or turbo conversion$1,500 – $4,000+
TMR plan review/approval (specific mods)$110.10 (2025) plus 3.4% from July 2026
Safety certificateUp to $102.70

The number moves with the number of codes involved, testing, stage inspections, documentation and rework. Full breakdown in How Much Does an Engineering Certificate Cost in 2026?

P-platers, check first

TMR advises P1 and P2 licence holders to check whether they're allowed to drive a high-powered or modified vehicle before modifying or buying one. Do that before the turbo goes on, not after.

Confirm current requirements with TMR or an approved person before you build. For what needs engineering nationally, see What Car Mods Need Engineering in Australia.

List your car free. Never expires.

List your car

Sources

Frequently asked questions

Who can certify a modified car in Queensland?

Complex modifications must be certified by an approved person accredited under TMR's Approved Person Scheme. Specific modifications that don't fit an approved code can only be approved by TMR itself.

Is an interstate engineering certificate valid in Queensland?

Not automatically. TMR says modifications certified in another state need either TMR approval or certification by a Queensland approved person before registration.

Do I need a mod plate for an engine swap in Queensland?

Engine upgrades are listed by TMR as complex modifications, which need certification by an approved person under an approved code. A like-for-like replacement engine is a basic modification and doesn't need approval if the car still meets the standards.

How much does a mod plate cost in QLD?

Approved person fees aren't set in the TMR material we checked, so they're quoted per job. As a 2026 ballpark, simple single-code jobs often cost a few hundred dollars and engine work commonly runs into the low thousands.

Do I have to notify TMR after modifying my car?

TMR says it's the owner's responsibility to notify it of changes, and certain changes such as colour, engine cylinders, fuel type, seating or GVM must be notified within 14 days using form F3524.

Related guides