Skip to content
Buying

How to Spot a Dodgy Engineering Certificate

"It's engineered, mate" is not a document. Here's how to check a modified car's certificate is real, current and actually covers what's bolted on.

6 min readUpdated 3 November 2026Horsepower House
How to Spot a Dodgy Engineering Certificate
In this guide

"Fully engineered" is one of the most common claims in modified car ads, and one of the least checked. A genuine certificate is worth real money. It means the car can be registered and insured with its mods. A fake, outdated or mismatched one means you're the one paying to get it certified properly, or pulling the mods out.

The good news: checking takes about 20 minutes and a couple of phone calls.

Quick answer: Ask for the original certificate and photos of any modification plate. Confirm the VIN matches the car, the certifier appears on the official state list, and the mods described match what's actually fitted. Then call the certifier to confirm they issued it. If any of those fail, treat the car as unengineered and price it accordingly.

What a real certificate looks like, by state

Each state runs its own scheme, using the national technical code, VSB 14 (the National Code of Practice for Light Vehicle Construction and Modification), as the technical baseline. VSB 14 sets the technical requirements; the states run the paperwork.

StateSchemeWho certifiesWhat you get
VictoriaVASS (Vehicle Assessment Signatory Scheme)VASS signatoryVASS approval certificate and a blue modification plate fitted to the car
NSWVSCCS (Vehicle Safety Compliance Certification Scheme)Licensed VSCCS certifierVSCCS compliance certificate
QueenslandApproved Person SchemeApproved person (TMR-accredited)Certificate of modification

Victoria

Transport Victoria says a VASS signatory issues a VASS approval certificate and a blue modification plate. The plate shows the vehicle's details, the certificate number and a modification code (VSB 14 codes, for example LA for engine work). It must not be removed from the vehicle.

For light vehicles, the approval certificate is valid for 30 days from issue. That's the window to present it for registration. An old certificate date on a car that's been registered since isn't a red flag in itself; what matters is that the car was registered with the mods and they haven't changed.

NSW

A licensed certifier assesses significant mods and issues a VSCCS compliance certificate. Certificates don't expire, and each modification needs only one certification. NSW also notes that certifiers can only assess work in their field of expertise, and some are limited to things like body fitting or tow couplings. A tow-bar certifier signing off a turbo conversion is a problem.

Queensland

Complex modifications, such as engine and suspension upgrades, gearbox changes and brake or steering replacements, need certification by an approved person working to Queensland's modification codes. Some mods can only be approved by TMR directly. TMR runs a searchable directory of approved persons.

The red flags

The VIN doesn't match

First thing to check. The certificate should carry the vehicle's VIN or chassis number. If it's a different car, or the number's been "corrected" by hand, stop.

The certifier isn't on the list

Look them up:

  • VIC: the VASS signatory contact list on the Transport Victoria site
  • NSW: the VSCCS licensed certifiers bulletin or certifier map on Transport for NSW
  • QLD: TMR's approved person search, or call 13 23 80

If you can't find the name, ask the seller who the certifier was and look again. Then call the certifier's listed number, not one written on the cert, and confirm they issued it for that VIN.

The mods don't match the paperwork

This is the most common problem, and it's rarely forgery. The car was engineered for one spec, then kept evolving:

  • Certified for one turbo, now running a bigger one
  • Engineered at a certain power level, now tuned well past it
  • Brakes certified with one caliper and rotor package, now running something else
  • Suspension certified at a ride height, then dropped further

Compare the cert's description line by line with what's on the car. Anything extra is uncertified. Our what mods need engineering guide helps you judge which differences matter.

"Engineered" with no paperwork

"It's engineered, the paperwork's somewhere" is the same as not engineered until proven otherwise. A real certificate exists, and the certifier will have records.

A workshop letter instead of a certificate

A letter on workshop letterhead saying the work was "done to a high standard" or "complies with VSB 14" isn't certification. Only a signatory, certifier or approved person under the state scheme can certify.

Interstate certificates

A cert from another state isn't automatically accepted where you'll register the car. Queensland states that interstate modifications must be approved by TMR or certified by a Queensland approved person before the vehicle is registered there. VicRoads' simplified interstate rego path applies only to vehicles that aren't modified. If you're buying across a border, ask a certifier in your state whether they'll accept or re-certify the work, and what it will cost. See How to Buy a Car Interstate.

Photocopies only

Ask for the original or a clear scan of the full document, and the plate if your state uses one. A blurry phone photo of half a page isn't enough to verify anything.

Questions to ask the seller

Before you inspect, get these answered in writing (a text or message is fine):

  • Who certified the car, and when?
  • What exactly did the certificate cover?
  • What's been changed on the car since it was certified?
  • Can you send a clear scan of the full certificate, and a photo of the modification plate if there is one?
  • Has the car been registered with these mods since the certification?

A seller with genuine paperwork answers these in five minutes. One who goes quiet, gets vague or says "it's all legit, trust me" has just told you where the risk is.

What to do if the cert doesn't stack up

You have three options:

  1. Walk. Often the right call if the gap is big, like an uncertified engine swap.
  2. Get a quote to certify it properly, and take that off the price. Expect a certifier to want to inspect the car, and possibly require changes before signing. Our engineering certificate cost guide has typical ranges.
  3. Ask the seller to sort it before sale. Clean, but it takes time, and you'll want to verify the new cert the same way.

Never buy on the promise that "it'll pass easily." That's the seller's opinion, not the certifier's.

Find a certifier near you

Before buying a heavily modified car, a quick call to a local certifier is free advice worth having.

Search by state at /workshops?service=engineering&state=vic, or change the state to suit.

Pair this with Buying a Modified Car: 15 Things to Check Before You Pay for the full picture.

Sources

Frequently asked questions

How do I check if an engineering certificate is real?

Check the certifier is on the official list for that state (VASS signatory list in Victoria, VSCCS certifier list in NSW, approved person directory in Queensland), confirm the VIN on the cert matches the car, and contact the certifier to confirm they issued it.

Does an engineering certificate transfer to a new owner?

The certification relates to the vehicle and its modifications, not the owner. What matters is that the mods on the car still match what was certified and that it's recognised in the state you'll register it in.

What is the blue plate on a Victorian modified car?

When a VASS signatory certifies a vehicle in Victoria, they issue a VASS approval certificate and a blue modification plate. The plate shows the vehicle details, certificate number and modification code, and must not be removed.

Is a workshop letter the same as engineering?

No. A letter from a workshop saying the work was done properly isn't a certification. Only a licensed signatory, certifier or approved person under the state scheme can certify modifications.

Related guides