In this guide
Making power is cheap until it isn't. On most platforms, the first 300rwkw is a sensible weekend project, 400rwkw becomes a serious build, and 500rwkw is where the bills start arriving for parts you never thought about. The engine gets the attention, but the gearbox, diff, brakes, cooling and engineering are what drain the account.
Quick answer: Typical ballpark AUD as of 2026, on top of the car: 300rwkw about $8,000 to $25,000. 400rwkw about $20,000 to $45,000. 500rwkw about $40,000 to $80,000+. Your platform, starting condition and how much you DIY move these numbers more than anything.
All power figures here are rear-wheel kilowatts on a chassis dyno, the way Australian builders normally talk.
Why every 100kW costs more than the last
At 300rwkw, many factory turbo engines are just getting comfortable. At 400rwkw, you're near or past what stock internals, fuel systems and clutches were designed for. At 500rwkw, almost everything between the engine and the tyres has been replaced or upgraded. Each step drags another layer of parts with it.
300rwkw: the sweet spot
Typical cost: $8,000 to $25,000
This is the most usable street-car power level. It's fast, it's tractable, and on the right platform it's achievable without opening the engine.
| Platform | How it usually gets there | Ballpark (AUD, 2026) |
|---|---|---|
| Turbo Barra (BA to FG XR6 Turbo) | Bigger turbo or high-flow, fuel, intercooler, tune | $6,000 to $15,000 |
| RB25DET | Bolt-on turbo upgrade, fuel, ECU, tune | $8,000 to $18,000 |
| LS1 / LS3 | Supercharger or turbo kit on stock engine | $12,000 to $25,000 |
| SR20DET / 4G63 / EJ20 | Bigger turbo, fuel, ECU, supporting parts | $8,000 to $20,000 |
What you'll usually need: a turbo or supercharger upgrade, injectors and pump, a proper tune, a better clutch on manual cars, and decent tyres. Read How Much Power Can a Stock RB25 Take? if you're on the RB path.
400rwkw: a serious build
Typical cost: $20,000 to $45,000
This is where most people find out how strong their factory parts really are. Some engines live here on stock internals with a careful tune; many don't.
What usually gets added on top of a 300rwkw setup:
- Fuel: Often E85 or flex fuel, bigger injectors, upgraded pump or surge tank ($2,500 to $6,000). See E85 Conversion in Australia.
- Engine: A forged short motor on weaker platforms ($8,000 to $20,000+).
- Clutch or converter: Twin-plate clutch or high-stall converter ($1,500 to $4,000).
- Gearbox: Built auto or stronger manual swap ($3,000 to $10,000+).
- Diff and axles: Upgrades or a stronger diff ($1,500 to $8,000).
- Cooling: Bigger radiator, oil cooler, better intercooler ($1,000 to $3,500).
- Brakes: Bigger rotors and calipers ($2,000 to $6,000).
For an LS-specific breakdown, read How Much Does It Cost to Turbo an LS?.
500rwkw: everything changes
Typical cost: $40,000 to $80,000+
At this level you're building a race-capable drivetrain that happens to be registered. It's very achievable on modern platforms, but the shopping list is long.
Expect most of the following:
- Forged engine, often with upgraded head studs, valve springs and oil system
- Large single turbo with external wastegate, or a big supercharger
- E85 or flex fuel with a high-flow fuel system, surge tank and possibly twin pumps
- Aftermarket ECU or advanced factory ECU tuning with full sensor setup
- Built auto or sequential/heavy-duty manual, twin-plate clutch
- Stronger diff, axles and tailshaft
- Big brake package, upgraded suspension and quality wide tyres
- Extra dyno sessions and ongoing maintenance
Where the money hides
These are the costs that blow budgets on every level:
| Hidden cost | Typical range (AUD, 2026) | Why it bites |
|---|---|---|
| Tuning and retunes | $1,500 to $5,000 over a build | Every hardware change means more dyno time |
| Engineering and compliance | $1,000 to $5,000+ | Testing, reports, sometimes rework |
| Tyres | $1,000 to $2,500 a set | More power, faster wear |
| Breakages | Unpredictable | Something always fails on the first drive at full boost |
| Insurance | Varies widely | Declared mods raise premiums, undeclared ones can void cover |
| Fabrication | $80 to $160+ per hour | Custom piping, mounts and wiring add up fast |
Rule of thumb from the shed: take your parts budget and add 30 per cent. You'll probably still go over.
What moves the number most
- Platform. An engine that takes big power on stock internals saves you $10k+ at 400 and 500rwkw. Turbo Barras and LS engines are popular for exactly this reason.
- Starting condition. A tired engine or worn gearbox means you're rebuilding before you're upgrading.
- Labour. Doing your own spannering can save tens of thousands. Paying a top workshop costs more upfront but usually less in rework.
- Parts quality. Cheap turbos, fittings and clutches often get bought twice.
- Your actual goal. A 400rwkw street car and a 400rwkw drag car need very different parts.
Spend in this order
If you're working towards a big number over time, plan the build so you don't buy parts twice:
- Fuel system sized for the final target, not the first step
- Clutch or converter rated beyond your current power
- Cooling before you add boost
- Brakes and tyres before you add the next 100kW
- Engine internals only when you actually need them
Engineering and rego
Big power almost always triggers engineering requirements, especially turbo conversions, engine swaps and major brake or suspension changes. Some states also apply power-to-weight limits for provisional drivers. Read What Car Mods Need Engineering in Australia and talk to a licensed engineer before you start. A car you can't register is worth a lot less than one you can.
Build or buy?
A 500rwkw build rarely sells for what it cost to build. That's bad news for builders and great news for buyers. A sorted, engineered, documented car can save you years and a big chunk of the budget. Just check the build history, tune files and engineering paperwork before you hand over money.
Need a workshop to quote your build?
Finished your build and ready to move it on?
List your car free. Never expires.
List your carFrequently asked questions
How much does it cost to make 500rwkw?
Ballpark as of 2026, a reliable 500rwkw street car typically costs $40,000 to $80,000+ in parts and labour on top of the car, depending on platform. Engines that hold big power on stock internals sit at the cheaper end.
What's the cheapest platform to make 400rwkw in Australia?
Turbo Barra Falcons and boosted LS Commodores are among the most cost-effective because of parts availability and strong factory engines. The cheapest platform is often the one you already own, if it's healthy.
Is rwkw the same as kW?
No. Rear-wheel kilowatts (rwkw) is measured at the wheels on a dyno and is lower than the engine's flywheel kW because of driveline losses. Australian builders usually talk in rwkw.
Do high-power cars need engineering?
Usually, yes. Significant engine power increases, turbo conversions and engine swaps typically need a licensed engineer's approval for road registration, and some states set power-to-weight limits for certain licence types.




