In this guide
The best first mod for almost any street car is a set of good tyres. The second is making sure the car is healthy enough to deserve them. Power comes later. Most people do it the other way round, bolt a pod filter and loud exhaust on a car with tired bushes and cheap rubber, then wonder why it's slower around a corner and harder to sell.
Here's the order that actually works, with typical costs.
Quick answer: 1. Health check and maintenance. 2. Tyres. 3. Brake pads and fluid. 4. Suspension and alignment. 5. Seat time. 6. Intake and exhaust. 7. Tune. 8. Power adders. Following this order typically costs $3,000 to $10,000 (ballpark AUD, 2026) before you touch the engine.
The mod order at a glance
| Order | Mod | Typical cost (AUD, 2026) | Why it's here |
|---|---|---|---|
| 1 | Health check and maintenance | $300 to $1,500 | No point modding a sick car |
| 2 | Quality tyres | $800 to $2,500 a set | Grip affects everything |
| 3 | Brake pads, fluid, lines | $300 to $1,200 | Stopping before going |
| 4 | Suspension and alignment | $1,500 to $5,000 | Control and confidence |
| 5 | Seat time / driver training | $200 to $800 per day | The cheapest lap time you'll find |
| 6 | Intake and exhaust | $800 to $3,500 | Supporting mods for the tune |
| 7 | Tune | $600 to $1,800 | Where bolt-ons pay off |
| 8 | Power adders | $5,000+ | Only once everything else can cope |
1. Health check and maintenance
Every build starts here. Fluids, plugs, coils, belts, cooling system, engine mounts and bushes. On turbo cars, add a compression and leak-down test, and check for oil in the intercooler piping.
Old cars especially hide expensive problems. Finding them now means you're not paying a tuner to diagnose a misfire you already had.
Typical cost: $300 to $1,500 depending on what turns up.
2. Tyres
Tyres are the only thing touching the road. A quality performance tyre improves acceleration, braking and cornering all at once. Cheap tyres make powerful cars slower and more dangerous.
Stick to sizes that suit your rims and your state's rules. Big changes in overall diameter or width can affect your speedo and may need approval.
Typical cost: $800 to $2,500 a set, fitted and balanced, depending on size and brand.
3. Brakes
Start with quality pads, fresh high-temperature fluid and braided lines if you'll do track days. For most street cars this gets you most of the way. A big brake kit is a later job, usually once power climbs.
Bigger brake upgrades can trigger engineering requirements in some states, so check first.
Typical cost: $300 to $1,200 for pads, fluid and lines. Big brake kits $2,000 to $6,000+.
4. Suspension and alignment
Quality dampers and springs, or a well-reviewed coilover set, transform how a car feels. Fresh bushes often make as much difference as new shocks on an older car.
Get a proper alignment afterwards. It's the cheapest way to make suspension work properly.
Avoid the trap of slamming it. Lowering a street car too far ruins ride, damages the underside and can make it illegal. Every state sets limits. Read Lowered Car Laws in Australia: How Low Is Legal?.
Typical cost: $1,500 to $5,000 for quality suspension, $100 to $250 for an alignment.
5. Seat time
A driver training day or a few track days will make you faster than any bolt-on. You'll also learn what your car actually needs next, instead of guessing.
Typical cost: $200 to $800 per day, depending on the venue and format.
6. Intake and exhaust
On most naturally aspirated cars, these make a small difference on their own. On turbo cars, a better exhaust and intake combined with a tune can make a real gain.
Noise is the trap. Loud exhausts are one of the most common reasons modified cars get defected. Read Exhaust Noise Limits in Australia by State before you buy. And never delete catalytic converters on a road car.
Typical cost: $800 to $3,500 depending on materials and whether it's a cat-back or full system.
7. Tune
This is where intake and exhaust mods start paying off. A quality tune smooths out drivability and adds power safely. Read Dyno Tuning: What It Costs and What to Expect so you know what you're paying for.
Typical cost: $600 to $1,800 for a flash tune on a supported factory ECU.
8. Power adders
Only now does it make sense to add a bigger turbo, supercharger, cam or engine work. By this point your tyres, brakes and suspension can actually use the extra power. For realistic budgets, see 300kW, 400kW, 500kW: What Each Power Level Really Costs.
Mods to skip early on
- Cheap coilovers. They often ride badly, wear fast and get replaced.
- Pod filters in hot engine bays. They can suck in hot air and make less power.
- Huge wheels. Heavier wheels and low-profile tyres hurt ride and often performance.
- Cosmetic body kits before mechanicals. Fun, but they don't fix anything.
- Anything noisy or loud enough to get you defected.
Engineering, rego and insurance
Most of the mods on this list don't need engineering if you stay within your state's rules on ride height, wheel and tyre size, and noise. Bigger changes, like turbo conversions, engine swaps and significant brake or suspension work, often do. Read What Car Mods Need Engineering in Australia and check with your state authority or a licensed engineer if you're not sure. Declare every mod to your insurer.
Resale tip
Keep every receipt and tune sheet. Cars with quality, sensible mods and good paperwork sell faster than ones with a pile of unexplained parts.
Need a workshop for your first mods?
Looking for a car that's already sorted?
Frequently asked questions
What is the best first mod for a car?
Good tyres. They improve acceleration, braking and cornering all at once, and every other mod depends on them. Before that, make sure the car is mechanically healthy.
Do intake and exhaust mods add much power?
On most naturally aspirated cars, an intake or cat-back alone adds very little without a tune. On turbo cars, exhaust and intake changes combined with a tune can make a noticeable difference.
Which first mods need engineering in Australia?
Mild mods like tyres, pads and quality replacement dampers usually don't, as long as they stay within your state's rules on ride height, wheel and tyre size and noise. Bigger changes like turbo conversions, engine swaps and significant suspension or brake changes often do.
Should I tell my insurer about mods?
Yes. Most insurers require you to declare modifications, and failing to do so can void your cover. Even small mods like wheels and exhaust are often on the list.




