Skip to content
Rules & Rego

Getting Your Modified Car Engineered in Victoria: Process and Costs

VASS certificates, blue mod plates and the 14-day rule. How to get a modified car legally signed off in Victoria, and what it typically costs.

7 min readUpdated 3 November 2026Horsepower House
Getting Your Modified Car Engineered in Victoria: Process and Costs
In this guide

In Victoria, if your modification goes beyond the basic limits in the rules, you need a VASS approval certificate from a licensed signatory, a blue mod plate on the car, and a heads-up to VicRoads within 14 days. Skip any of those and you're running a car that can be defected, knocked back at roadworthy time, or left uninsured after a crash.

Here's how the process actually works, what triggers it, and what you should budget.

Quick answer: Victoria uses the Vehicle Assessment Signatory Scheme (VASS). Talk to a signatory before you build, have them inspect and test the finished car, then fit the blue modification plate and notify VicRoads within 14 days. Light vehicle certificates are valid for 30 days from issue. VicRoads doesn't set signatory fees; ballpark costs run from a few hundred dollars for simple jobs to several thousand for engine or turbo work.

What VASS actually is

VASS is Victoria's scheme of approved signatories: experienced engineers and assessors authorised to check that modified, individually constructed and some imported vehicles meet registration standards. The signatory inspects and tests the car, then issues a VASS approval certificate and a blue modification plate. The plate shows the vehicle details, certificate number and a modification code (for example, an LA code for engine work). It stays on the car and must not be removed.

The technical rules sit in two places:

  • VSI 8 (Victoria's guide to modifications for motor vehicles) for state-specific requirements.
  • VSB 14, the National Code of Practice for Light Vehicle Construction and Modification, published by the federal Department of Infrastructure.

Which mods need a VASS certificate in Victoria

Transport Victoria lists these as needing a VASS approval certificate (light vehicle highlights):

  • Engine power increases greater than 20%
  • Engine changes not offered by the manufacturer for that model
  • Significant performance or emissions changes on pre-1986 passenger and off-road vehicles (and pre-1988 commercials under 2.7t GVM)
  • Airbag suspension
  • Internal rollcages
  • Exhaust extractors on vehicles built after July 1976 (or acceptable manufacturer evidence)
  • Suspension or steering changes outside VSB 14 or manufacturer specifications, particularly on ESC-equipped cars
  • Changes affecting ADR-covered parts, structure, safety systems or emissions
  • Extra seats and seatbelts, LHD to RHD conversions, chassis replacement, GVM changes

A few things are flat-out banned: Victoria says nitrous oxide injection systems must not be fitted, and you can't permanently lock a diff or fit a spool for road use.

For a full breakdown of what's in and out across Australia, see What Car Mods Need Engineering in Australia.

What usually doesn't need a certificate

VSI 8 gives examples approved without a certificate when fitted to the relevant standard: bull bars, tow bars, window tint within the rules, roof racks, mudflaps and gas shocks that keep the original ride attitude. Under VSB 14, basic lowering is generally fine without certification as long as total height change stays within 50mm, you keep at least two thirds of the original suspension travel, and you maintain at least 100mm ground clearance within a metre of an axle. Wheels and tyres have their own limits (overall diameter no more than 15mm larger or 26mm smaller than standard, and track no more than 25mm wider).

The process, step by step

1. Talk to a signatory before you spend money

This is the step people skip and regret. Transport Victoria recommends discussing your plans with a signatory before starting. A good signatory will tell you what parts, brake upgrades and documentation they'll want to see, which saves you ripping half the car apart later. Give them as much detail as you can: engine, turbo, fuel system, brakes, tyres, suspension, ECU.

Transport Victoria publishes separate signatory contact lists for light vehicles (GVM 4.5t or less, imports, street rods, motorcycles) and heavy vehicles. Signatories are licensed for specific modification types, so pick one who actually does your kind of job. You can also search for engineering workshops in Victoria.

2. Build to the code

Do the work to the VSB 14 section the signatory nominates. For engine work that might be LA2 (performance engine) or LA3 (turbo or supercharger not offered by the manufacturer). Those codes require the rest of the car to be upgraded to suit the extra performance, which usually means brakes.

3. Inspection and testing

The signatory inspects the car and runs whatever tests the job needs. Depending on the work, that can include brake testing, a lane change test, noise testing or emissions evidence. This is where costs can climb.

4. Certificate, plate and VicRoads

Once the car passes, you get the certificate and blue plate. Then:

  • Notify VicRoads within 14 days of the modification, using the Change of vehicle details form or at a customer service centre.
  • Some modifications also need a VicRoads inspection, where you present the car and certificate at a customer service centre. Ask your signatory whether yours does.
  • Light vehicle certificates are valid for 30 days from issue, so don't sit on it.

5. Tell your insurer

Not a legal step, but the one that protects you. An undeclared mod is a common reason for a knocked-back claim.

What it costs in Victoria

VicRoads does not regulate or set signatory fees. It depends on how much inspection and testing is involved, and a signatory may need to review your details before quoting. Typical ballpark figures as of 2026:

JobTypical signatory cost (AUD)
Single simple item (seats, cage, one-off brake upgrade)$400 – $1,000
Suspension or airbag setup$600 – $1,500
Engine swap or turbo conversion$1,500 – $4,000+
Emissions testing, if requiredCan add well over $1,000
Rework and re-inspectionExtra, varies

What moves the number: how many codes are involved, whether testing is needed, how well documented your parts are, how far the signatory has to travel, and whether the car passes first time. Our full breakdown is in How Much Does an Engineering Certificate Cost in 2026?

Where roadworthies fit in

A roadworthy certificate (RWC) and a VASS certificate are different things. An RWC is a safety inspection by a licensed vehicle tester, needed for selling, re-registering or clearing some defects, and it's current for 30 days. It doesn't confirm compliance with every ADR, so it won't legalise a modification, and it still inspects the brakes, steering and suspension you've modified. More on that in Roadworthy vs Engineering.

Buying or selling an engineered car

If you're buying, ask for the VASS certificate and check the blue plate is on the car and matches the paperwork. If you're selling, the certificate is a big part of the value. Put it in the listing and in the photos. Turbo builds have their own quirks, covered in Can You Register a Turbo-Converted Car in Victoria?.

Rules get revised, so confirm current requirements with VicRoads or your signatory before you build.

Got an engineered car you're ready to move on? It's free to list on Horsepower House, and listings never expire.

List your car free. Never expires.

List your car

Sources

Frequently asked questions

What is a VASS certificate in Victoria?

A Vehicle Assessment Signatory Scheme (VASS) approval certificate is issued by an approved signatory after they inspect and test a modified vehicle and confirm it meets registration standards. It comes with a blue modification plate that is fixed to the car.

How long is a VASS certificate valid for?

For light vehicles, the VASS approval certificate is valid for 30 days from the date of issue, so line up your next step with VicRoads before it lapses. Certificates for modified heavy vehicles do not expire.

Do I have to tell VicRoads about modifications?

Yes. Victoria requires you to notify VicRoads within 14 days of a modification, using the Change of vehicle details form or at a customer service centre.

How much does VASS engineering cost?

VicRoads doesn't set signatory fees. As a ballpark in 2026, simple single-item jobs often land in the hundreds of dollars, while engine swaps and turbo conversions commonly run into the low thousands, before any emissions testing.

Do I need engineering to lower my car in Victoria?

Mild lowering within the national code (VSB 14) basic limits generally doesn't need a certificate, but you must keep at least 100mm ground clearance and two thirds of suspension travel. Airbag suspension needs a VASS certificate in Victoria.

Related guides