Skip to content
Buying

How to Tell a Genuine Build From a Cheap One

Two cars, same dyno sheet, same wheels, very different futures. Here's how to read a build and tell which one was done properly.

7 min readUpdated 3 November 2026Horsepower House
How to Tell a Genuine Build From a Cheap One
In this guide

Two cars on the dyno make the same number. One runs for years. The other spits a rod at the next track day. From the listing photos, they're identical.

The difference is in the parts you can't see in a hero shot and the decisions that didn't make it into the ad. Here's how to read a build like a workshop would.

Quick answer: A genuine build has receipts from known suppliers, supporting mods that match the power, neat fused wiring, a fuel system suited to the fuel, clean welds, a tune from a known tuner on a stated fuel, and engineering where required. A cheap build cuts corners on exactly those things: replica parts, stock supporting systems, messy wiring, no tune records and no paperwork.

Start with the story, not the spec sheet

Ask the seller to walk you through the build in order. When was each stage done, who did it, and why? A genuine build usually has a logic: power went up, so fuel, cooling, clutch and brakes went up with it. A cheap one often reads like a shopping list of the fun parts.

Questions that sort them fast:

  • Who tuned it, and can I call them?
  • What fuel is it tuned on, and at what boost?
  • What happened to the factory parts?
  • What's the next thing it needs?

An honest owner usually knows exactly what the car needs next. "Nothing, it's perfect" on a 20-year-old modified car is a story.

Parts: genuine, replica or unknown

Replica turbos, intercoolers, wheels, coilovers and manifolds are everywhere. Some are fine for what they are. The problem is when they're sold as the real thing, or when a replica is asked to do a genuine part's job at high boost.

How to check

  • Receipts. From the brand or a known retailer, with part numbers.
  • Markings. Compare castings, serial tags, logos and finish against the maker's own photos. Fake parts often get small details wrong.
  • Price sense. If a seller says a part is genuine but the build total seems impossibly low, ask how.
  • Ask a workshop. Someone who fits that brand every week can usually pick a copy quickly.
AreaGenuine buildCheap build
TurboKnown brand, receipt, matched to fuel and engineUnbranded or "replica of", unknown internals
Fuel systemPump, lines, filter and injectors sized for the power and fuelFactory pump "with a bit of extra voltage"
ECUKnown standalone or reputable reflash, tuner on recordPiggyback or tune of unknown origin
ClutchRated for the torqueStock clutch, "holds fine"
BrakesUpgraded to match speed and weightStock brakes behind big wheels
SuspensionKnown coilovers, set up and alignedCheap coilovers slammed to the stops

Wiring tells you everything

If you only check one thing under the bonnet, check the wiring. It's where tidy builders and rushed builders differ most.

Good signs:

  • Loomed and sheathed runs, secured away from heat and moving parts
  • Proper connectors, soldered or crimped and heat-shrunk
  • Fuses and relays for added circuits, clearly labelled
  • Clean, solid earth points

Bad signs:

  • Scotch-lock taps and electrical tape
  • Wires zip-tied to hot pipes or hanging near belts
  • Unused wires cut and taped off with no explanation
  • A rat's nest behind the dash or under the ECU

Bad wiring causes intermittent faults that are expensive to chase and, in the worst case, fires.

Fuel and the tune

Fuel is where engines die. Check:

  • The fuel the car is tuned for, and what's been going in it
  • E85 or flex-fuel setups with lines and fittings rated for ethanol (see E85 Conversion in Australia)
  • Pump and injector sizing versus the claimed power
  • A dyno sheet that shows air-fuel ratio and boost, not just a peak number

A tune from a known tuner, with a date and fuel noted, is worth more than a big number on a sheet with no name on it.

Fabrication and welds

Look at exhaust, intake, intercooler piping, mounts and anything structural. Even, consistent welds with clean edges suggest someone who knew what they were doing. Lumpy, porous or ground-back-to-hide welds suggest otherwise. Pay extra attention to anything holding up the engine, gearbox or suspension.

Chassis cuts for tubs, turbos or exhaust clearance should be finished, rust-protected and, where your state requires it, engineered.

Supporting mods: the honesty test

This is the clearest tell. Power costs money in places nobody photographs. If the car claims serious power, ask about:

  • Cooling: radiator, oil cooler, intercooler
  • Driveline: clutch, gearbox, diff, axles
  • Fuel: pump, lines, regulator, injectors
  • Brakes: pads, rotors, calipers, fluid
  • Engine internals: if the power level is beyond what the stock bottom end typically handles

Our 300kW, 400kW, 500kW cost guide shows what each power level usually needs to live. If a car claims the top end on stock supporting parts, the build isn't finished.

Paperwork and legality

A genuine build that's meant for the street has the mods certified where they need to be. A cheap build often skips this, and that becomes your cost.

Signs a car has been looked after

Build quality is one thing. How it's been treated since is another. Look for:

  • A logbook or folder of service records with regular oil changes, more frequent than factory intervals if it's making real power
  • Fresh fluids and filters, not just a quick wash before the inspection
  • Consistent tyres across each axle, not four mismatched brands
  • Spare factory parts kept and offered with the car
  • An owner who knows the boost, fuel, oil grade and service intervals without looking them up

A car with a small, well-maintained setup is often a better buy than a big-power build that's been thrashed and neglected.

Owner builds aren't automatically worse

Some of the best cars on the market were built in a home garage by someone obsessive. Some of the worst came out of a workshop on a budget. Judge the work itself. A member Builds thread or a folder of progress photos and receipts is gold, it shows how the car was put together. Browse examples at /builds.

Before you pay

Get a specialist to look over it. A performance workshop will spot replica parts, tired turbos and bad wiring faster than anyone. Read Should You Get a Pre-Purchase Inspection on a Modified Car? and work through the 15-point modified car checklist.

Find builds worth a closer look

Built one properly yourself? It deserves a buyer who can tell the difference.

List your car free. Never expires.

List your car

Frequently asked questions

How can I tell if turbo or performance parts are genuine?

Ask for receipts from a known supplier, then compare part numbers, casting marks, serial tags and finish against the manufacturer's own photos. Many brands publish guides for spotting fakes. If in doubt, ask a workshop that fits that brand.

Is a home-built car always worse than a workshop build?

No. Plenty of owner builds are meticulous. Judge the work, not who did it: wiring, fuel system, welds, supporting mods and a proper tune tell the story.

Do dyno sheets prove a build is good?

A dyno sheet shows peak power on one day, on one dyno. It says little about reliability. Air-fuel ratio and boost traces, the tuner's name and the fuel used are more useful than the headline number.

What's the biggest red flag in a modified car?

Big power with stock supporting parts. A high power claim on a factory fuel system, clutch, cooling and brakes usually means the build stopped at the fun part.

Related guides